A brick made from what a power plant leaves behind.
Fly ash is the fine powder collected from the chimneys of coal-fired power stations. Mixed with sand or stone dust, lime or cement and gypsum, it is pressed into a mould and cured with water. It is never fired in a kiln, and it needs no topsoil.
Drag a slider to rebalance the mix. Illustrative only. Each plant sets its own recipe and tests it against the standard.
Spin it. Look at every side.
Six reasons builders switch.
Higher compressive strength
Pressed bricks reach strength classes that common burnt clay bricks often miss, so walls carry load with confidence.
Same size, every brick
Moulded shapes and sharp edges mean thinner joints, straighter walls and less mortar.
Smoother plaster
A flat, even face takes plaster in a thinner coat, which saves cement and labour.
Cooler rooms
Lower thermal conductivity helps indoor temperatures stay steadier through summer heat.
No topsoil dug up
Every fly ash brick puts waste to work and leaves fertile farmland where it is.
No kiln smoke
Curing replaces firing, so there is no coal burned to make the brick itself.
Fly ash brick vs. clay brick.
| Property | Fly ash brick | Burnt clay brick |
|---|---|---|
| Raw material | Fly ash, sand, lime, gypsum | Topsoil |
| Making | Pressed and water-cured | Fired in a kiln |
| Compressive strength | 7.5–10 MPa and above | About 3.5 MPa common |
| Size and shape | Uniform and sharp-edged | Varies between batches |
| Mortar and plaster | Less needed | More needed to level |
| Weight | About 3 kg each | About 3.5 kg each |
Typical values for standard-size bricks. Ask for the test certificate of the batch you buy.
From ash to wall in four moves.
Blend
Same brick. Three ways to lay it.
Load-bearing and partition walls alike.
- Houses and villas
- Apartment blocks
- Compound walls
- Factories and godowns
- Schools and hospitals
- Farm buildings
- Infill walls in framed structures